AGS-300 is suitable for bagged pre-mix​★↑↔ed grout, automatic wat®"ering, bag loading, simpler strucδ•×βture, higher efficiency, the use ofδ Ω≥ integrated special controll€₩er, independent function, reliable and ≈Ω₩↔durable.

Product Introduction

The AGS-300 is a new auα↕tomatic grouting contro‍€&l system developed for premixed grouts‍¶. Batching link: AGS-300§β can automatically control the••₽ amount of water accordin∑ α g to the number of feeding bags,↔♥ and then pour the emulsion< < material into a bag $♣≥into the mixing bucket for sti‍> rring. Grouting session: AGS-¥§✔300 supports two modes of"γ switching control and constant voltag®★β"e frequency conversion control, su​>✘↑itable for various models. Co™→mpared with traditional equipment, in  ↑the project of using pre-mixed grouti↔≥& ng material, the efficiency of A©λGS-300 batching is not only signi÷‍ficantly improved, but als♦αo due to the cancellation of thφε  e feeding lifting part,<≥  the mechanical structure of t >₽Ωhe whole machine is si∑✘mpler, the cost is lower, the±↔÷ failure rate is low, and ••β✔the maintenance is more convenie÷$nt.

Product Features

• On-water control with flow;
• Support 2 jacks pr₽ 'essure and 2 jaφ÷©cks flow monito •₽ring, suitable for large-cycle grout÷₩ing, vacuum grouting ✘₽₽Ωand other different needs;
• Support 4 motor control andδδγ← 1 channel inverter control, suita↓ ≠ble for constant pressure₹©↑ grouting;
• Using 5-inch TFT LCD screen, the δ≠picture is clear and concise and ₩£easy to operate;
• Built-in physical buttons elσ≥iminate the need for additional extern¥‍↕↓al buttons;
• The signal processing section is d±↔βesigned with precision, low-dr€σift devices to ensure ♦™signal acquisition a‍©€↔ccuracy;
• Multiple interface protecti✘ βon, ESD electrostatic protection, ​≠output current limiting, short circuitα± protection, input overvoltage,$α overcurrent protecti§&"≥on, perfect protection can ma<α≤ke the equipment even i ♠<♣n the case of short circuit of the×  signal line to minimize the occurrence₽♠ of failure, reduce maintenance and <$∞∑after-sales costs;
• Independent wiring harness, &∑≥quick to plug and unplug, easy to Ω§exchange accessories to troubleshoo&←'εt, quick maintenance;
• Dedicated hardware des≠φΩΩign, compared with general-puδγrpose platforms such ↓βas general-purpose PC™↔δs or PLCs, is more con₹≠ducive to cost allocation×‌±, and the product reliabiσ✔lity is higher under ✔↑the same production c♦∏©✘ost;
• Critical devices are designed for i' ±ncreased redundancy to extend the ✔☆mean time between failures×ε 
• The software is based on₽∑> RTOS real-time operating system oper★ §÷ation, compared with the non-real-ti₹₩↕me operating system of ¥∞similar products, the time contro¥ ✔l is accurate and the response is ™★timely, which is conducive to γ®×ensuring the control accuracy, while∏& cutting useless fun'✘ctions, ensuring that the syγ∑​Ωstem is streamlined and relia¶∑ble;
• Adaptive batching and gr←'•outing control algorithm, part ofΩ→ the control paramet↕βγers can be adjusted '®¶on site, easy to cal≠π•ibrate, widely adapt to a va‌÷•riety of different structures an₹✘↑✘d different working conditions;
• Easy operation logic and₽€ support for automatic/manual swit×✔ching to handle a wide range of sit&φuations;
• Accurate recording of grou™&∞ting and batching data with tamper-↕±↓↔proof functionality;
• Through the 4G network, data can be v♦€​λiewed and downloaded "‌φαremotely at any time, and third-part¶<y platforms can be connected;

Basic parameters